Announcement

Collapse
No announcement yet.

Volmor string machines

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Volmor string machines

    Today, I get to put on different hats: Volmor and Mendes string machines to troubleshoot them. One set has Steltronic scoring and the other has Qubica after they acquired the ST1 and renamed it TMS machines.

    Volmor chassis.jpgVolmor string table.jpg
    .
    .
    .
    This post is not an unpaid promotion of my business.

  • #2
    Easy machines to work on, only if it comes to electronics it can be sometimes bit hard to trouble shoot where it comes from, good luck and have fun !!

    Comment


    • #3
      Vollmer

      If at first you don't succeed, try, try, again. Then quit. There's no use being a damn fool about it." -W.C.Fields

      Comment


      • #4
        If at first you don't succeed, try, try, again. Then quit. There's no use being a damn fool about it." -W.C.Fields

        Comment


        • #5
          Hi Ted,
          I have been using Vollmer String Setters since 2004 and never had a breakdown. They are easy to adjust, a bit of common sense is all that is required. If you need any help, ask me and I try to solve it. Sorry, but I can not help with the Stelltronic software; we have developed our own as we had to many issues.

          Comment

          Topic Starter RibbonScript

          Collapse

          Adsense Classic 2

          Collapse
          widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
           

          Well this is a first.

          We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...
           

          Ball return wheel guide roller removal.

          Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...
           

          Even old mechanics find something new.

          All my years working on these things I never had this happen…… until last week. ...
           

          82-90XL Frontend Gearbox Parts - Rebuild Woes

          We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...
           

          Prolane damage

          Can this be repaired?
           

          LED Ball Lights

          Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...
          Working...
          X