Announcement

Collapse
No announcement yet.

Pro shop : Lease or own

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Pro shop : Lease or own

    Our center is considering leasing out our pro shop and we would like to know the pros and cons. We also would like to get an idea of what sort of contract we should offer. What sort of money should we charge and what type of other "arrangments" are available.


    billman
    let me be myself

  • #2
    Re: Pro shop : Lease or own

    Our Pro Shop is leased at the Reno Hilton.
    Send Todd Thompson an e-mail at ToddThompson@renohilton.com or call him at 1-800-328-0199 & he can tell you what our set up is.
    He doesn't get much of a chance to check out Bowl-Tech. He relies on me for that.
    Dutch

    Comment


    • #3
      Re: Pro shop : Lease or own

      Local shops around here are 1 to 2 grand a month....give or take.

      pro's - assured (contractural) income reguardless (2) dont have to lift a finger to get your contract amount.

      cons - so long as tenant if fulfilling contractual agreement, not much you can do about philosophy (bad mouthing center). (2) some shop owners around here live better than owner of centers. (3) shady characters make a mint on repair of center ball prices

      Comment

      Topic Starter RibbonScript

      Collapse

      Adsense Classic 2

      Collapse
      widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
       

      Approach Wear - DBA IQ/Anvilane

      Our approach panels have a lot of wear at the joint between the first approach panel and the approach/heads panel. Nearly every one has the printed image worn through to various...
       

      Rake sweeping out of time, and pin launching onto lane.

      I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...
       

      Strange sweep problem

      I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...
       

      GSX Distributor shaft bearings

      Two part topic:
      1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

      2. ANY of these bearings with the black support mount...
       

      The Legacy of the A2

      I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...
       

      Table turning on short stroke.

      Hello dear Bowltech members.
      First let me say thank you for your time. am plagued by a big issue for three weeks now.
      our technician is working full time on another...
      Working...
      X