Announcement

Collapse
No announcement yet.

Bates grip

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bates grip

    Does anybody still have the neccesary equipment to drill this type of hole? I have an elderly bowler who would like to know. Thinks it may be helpful for him. May have also had other names. I seem to dimly recall a curvall ball with a curved hole.

  • #2
    I recently had to do this for an elderly customer. Dremel actually sells the depth guide and the different size balls to complete the grip inside the holes. Sadly you will have about $125 into the pieces.

    Comment

    Topic Starter RibbonScript

    Collapse

    Adsense Classic 2

    Collapse

    Related Topics

    Collapse

     

    A2 1 to 1 Gear Box Cover Replacement Due to Crack

    I am refurbishing two converted A2 machines that I will be installing in my home basement this fall. One of them has a leaking gear box and cracked 1:1 gear box cover. I have...
     

    Streamlane Mask Halo Lights

    With huge thanks to "Toby" for all his help & expertise...my old masks now have for-real halo lights again.


    ...
     

    Baddest Tool Chest In Town

    Adios, motor boater!

    ...
     

    Aluminum Repair and Welding

    with our broken moving deck i have been asked to figure out if there is a way we can weld it back together in house for very little expense.
    http://aluminumrepair.com/...
     

    Setting Table Harness Connections

    Hi, guys.

    We recently replaced our setting table harness and when the machine's run in diagnostic mode, we get 01, 02, 03, 04 + 09 errors, or when you place pins...
     

    check this jam...

    the ball stuck the table up

    ...
    Working...
    X