Announcement

Collapse
No announcement yet.

Ball damage help.

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • DBZodos
    replied
    Was it idling on the carpet? Rubbing on something - cushion rivets etc. Or partway into the ball exit and rubbing against PBL lift belt.

    Leave a comment:


  • Jonewyn2
    replied
    I did not see anything but our proshop said he cleaned it off with acetone. The ball wasn't actually damaged. Ball return has good c tracks and v wheels

    Leave a comment:


  • AndrewCarleo
    replied
    Looks like damage is from it spinning somewhere and hitting something. I'd check ball return up front. Bring a flashlight and look for ball shavings.

    Leave a comment:


  • Jonewyn2
    started a topic Ball damage help.

    Ball damage help.

    No stop on lane. Just found out at the end of the night. What might cause this.
    You may only view thumbnails in this gallery. This gallery has 1 photos.

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
 

Well this is a first.

We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...
 

Ball return wheel guide roller removal.

Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...
 

Even old mechanics find something new.

All my years working on these things I never had this happen…… until last week. ...
 

82-90XL Frontend Gearbox Parts - Rebuild Woes

We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...
 

Prolane damage

Can this be repaired?
 

LED Ball Lights

Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...
Working...
X