Announcement

Collapse
No announcement yet.

POS suggestions

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • POS suggestions

    Hello all. my center went under and closed last winter. Now a new owner has stepped in and we are re opening in may. \o/
    I want to know what you guys use and would recommend for the Point of Sale software. We used to use a program from a company called ideal, but the new owner wishes to change software.

    Before we had a mid sized restaurant and bar, bowling and lazer tag and we used Ideal for all of this. This time around there's no lazer tag and the restaurant will be scaled back to a more basic approach.

    Thanks in advance for any opinions and help.
    Sam

  • #2
    if it is a low volume rest. steltronic has made strides in their food and beverage with vision/focus....if high volume microsale, micros, or aloha

    Comment

    Topic Starter RibbonScript

    Collapse

    Adsense Classic 2

    Collapse

    Related Topics

    Collapse

     

    A2 1 to 1 Gear Box Cover Replacement Due to Crack

    I am refurbishing two converted A2 machines that I will be installing in my home basement this fall. One of them has a leaking gear box and cracked 1:1 gear box cover. I have...
     

    Streamlane Mask Halo Lights

    With huge thanks to "Toby" for all his help & expertise...my old masks now have for-real halo lights again.


    ...
     

    Hybrid (and EcoFriendly) Bumpers (2012)

    It's been about 10 years since we first tried this - 46 lanes and still working fine, auto air bumper cylinders on the BankShot bumpers. Here are videos of a home install with...
     

    Baddest Tool Chest In Town

    Adios, motor boater!

    ...
     

    Aluminum Repair and Welding

    with our broken moving deck i have been asked to figure out if there is a way we can weld it back together in house for very little expense.
    http://aluminumrepair.com/...
     

    Setting Table Harness Connections

    Hi, guys.

    We recently replaced our setting table harness and when the machine's run in diagnostic mode, we get 01, 02, 03, 04 + 09 errors, or when you place pins...
    Working...
    X