I tap the end of the shaft to 3/8 X18 and I made a bolt afair for my slide hammer screw it in and a couple hit bring it right out
good luck and keep it simple
-
-
by tjbjeepnlooking for the nut insert for the astro line free standing ball rack
Thanks05-05-2022, 10:43 AM -
by tjbjeepnsound like maybe the spring trigger rod off the hockey stick [ aka cushion support arm ] needs some adjustment after the new gromets were installed
Good Luck, And Keep...02-16-2022, 01:09 PM -
Reply to Cross conveyor beltsby tjbjeepnyou could take some sandpaper to the new belts and rough them up a LITTLE and it could help ,be shure to check to see if your pins are coved in oil and may need to be cleaned...02-16-2022, 11:51 AM
-
Reply to Scrapping gearbox housingsby tjbjeepnI tap the end of the shaft to 3/8 X18 and I made a bolt afair for my slide hammer screw it in and a couple hit bring it right out
good luck and keep it simple05-05-2022, 10:55 AM -
by tjbjeepnlooking for the nut insert for the astro line free standing ball rack
Thanks05-05-2022, 10:43 AM