-
Reply to Clutch reset lever woes.by masternutThe newert style levers pushes the linkages down lower, and in some cases the clutch release lever will accutally bind on the 4:1 housing04-17-2021, 06:01 PM -
Reply to Five pin fails to load deckby masternutcheck the amount of friction (release force )it take to release your torsion latch, If pressure is too much it can cause spider to fail to release and the spoons will rest on...04-17-2021, 05:59 PM
-
Reply to Moving Deck Issueby masternutRun machine to 290 degrees(rake crank rod straight up) this is when deck should be fully back and when deck cable is most loose. pull on cable to bring deck forward and then slowly...04-17-2021, 05:52 PM
-
Reply to Slow down a model Aby masternutWell with each speed change we noticed smoother operation and especially in the area of gearbox clutch life. At A-2 speed we had to pull clutch every 10-12 months or you ran risk...10-12-2017, 11:43 AM
-
Reply to Clutch reset lever woes.by masternutThe newert style levers pushes the linkages down lower, and in some cases the clutch release lever will accutally bind on the 4:1 housing04-17-2021, 06:01 PM
-
Reply to Five pin fails to load deckby masternutcheck the amount of friction (release force )it take to release your torsion latch, If pressure is too much it can cause spider to fail to release and the spoons will rest on...04-17-2021, 05:59 PM